Copyright TrailerTREK Midlands Motor Movers part of the TrailerTREK Ltd Group | Terms and Conditions

Company Name - TrailerTREK Ltd   Company Number - 07862684   VAT Number:-144536612

Registered Office - Unit 8a, Oak Farm, Hampton Lane, Catherine de Barnes, Solihull, Birmingham B92 OJB

       Midlands Premier Motor Mover Fitters      

     TrailerTREK Motor Movers      

Call 07938 960725 or 0121 7040108 for Professional Fitting

Enduro Series 2


For single axle or twin axle caravans.


The Enduro series 2 has been redeveloped. Based on the highly successful original Enduro, the series 2 builds on its predecessor's success. Now with improved Soft Start/Soft Stop, the new electronics provides even better precision manoeuvring. The Enduro is controlled by the innovative Quattro control system which can be set to either single OR twin axle (2 motor) configurations.


This means that the Enduro can even be transferred from a single to a twin axle van when you upgrade.

A further bonus is that by adding and additional pair or motors and controller you can even smoothly upgrade to full 4 wheel drive.


The Enduro Series 2 also has an integrated gear box replacing the old chain drive system. Cross actuation is standard on this model.


The Enduro Series 2 is lighter, featuring lightweight Aluminium rollers, this improves the power to weight ratio.


The Enduro Series 2 caravan mover works on most surfaces in most conditions.

Control when going up hill, downhill, control when hitching, and unhitching.


The Purpleline Enduro mover is supplied with complete fitting kit which includes all cables, clamps, p-clips, cable ties, chassis stops, convoluted cable trunking, control board and remote control.


The Enduro Series 2 caravan mover represents excellent value for money being one of the cheapest mover we sell, but still offers excellent build quality and reliability.











 





TrailerTREK Motormover Fitting Across The Midlands

Call - 07938 960725 or 0121 7040108

Specifications:- Enduri Series 2


Designation Enduro Mover EM 4444  

Operational Voltage -  12 Volt DC  

Average Current Consumption  - 20 Ampere  

Maximum Current Consumption - 120 Ampere  

Speed - 20cm per sec.  

Weight -  35 Kg (excluding all fittings)  

Safe Working Load (SWL) 2250Kg (twin motor) 3500Kg (quad motor)

Minimum Width (caravan/trailer) 1800mm

Maximum Width (caravan/trailer) 2400mm

Power Source (caravan leisure battery)  12V  110Ah



Enduro 2 Motormovers

Purpleline Motormovers


Enduro S2 Motormover

DIY Price - £CALLincl VAT and delivery


(T&C’s Apply)

Fitted at your home - £CALL incl VAT and fitting


Call us for fitting date or email and we will call you back


Contact Us

 Secure Payments  

You Tube Footage From Purpleline - ENDURO Motormover :-

The NEW Enduro series 2 has been redeveloped. Based on the highly successful original Enduro, the series 2 builds on its predecessor's success. Now with improved Soft Start/Soft Stop, the new electronics provides even better precision manoeuvring.


The Enduro Series 2 also has an integrated gear box replacing the old chain drive system.


The Enduro Series 2 is lighter, featuring lightweight Aluminium rollers, this improves the power to weight ratio.



The Purpleline Enduro mover is supplied with complete fitting kit which includes all cables, clamps, p-clips, cable ties, chassis stops, convoluted cable trunking, control board and remote control.


The Enduro Series 2 caravan mover represents excellent value for money being one of the cheapest mover we sell, but still offers excellent build quality and reliability.



Quattro -

4 wheel drive motormover

Will the e-go fit my caravan?
The e-go is suitable for L and U profiled chassis with a chassis thickness between min. 2.8mm and max. 3.5mm. The standard installation kit only provides parts for installing the mover within the measurements shown in the Installation Parameters Diagram.
The ground clearance from the bottom of the chassis must be a minimum of 165mm - the e-go will decrease by 50mm.


Are there adaptor kits available for non standard chassis?
Yes. For BPW flat frame, Vario III one-piece, Vario III two-piece. Also available for shallow type chassis are spacer kits. Please verify the height of your chassis in order to determine type of adaptor or spacer necessary. Please contact us for further information.


Will the e-go fit on twin axle caravans?
The e-go is suitable for single and twin axle caravans when using the appropriate electronics.


Can I fit the e-go myself?
Please review the User Manual which may help you to decide if self-fit is an option, or contact us for further advice. Alternatively, please contact your dealer or a mobile fitter.


Does the e-go have soft start and stop?
It has precision control operation and provides excellent accuracy.


Where is the best location for the mover?
The best location for the e-go is in front of the axle. However if this is not possible it is usually possible to fit behind the axle. Please contact us or your dealer for advice.


Does it fit on a caravan with shock absorbers?
Yes.


Where do I find the serial numbers?
The serial numbers are located on the ends of the motor assemblies; there are two serial numbers, one on each motor and both numbers must be provided when completing your product registration.


The Quattro Control Unit…

A switchable and modular electronic control system suitable for enduro and e-go 2 & 4-wheel driven motor mover systems.

Modular means ‘flexible’…

Smart technology from one controller whatever make or model of caravan.